Pruning the leaves, after the fleshy water, the disinfected scissors need to be used to trim the fleshy water, and spray the multi -bacterial solution on the leaves for treatment; The room is maintained and the room temperature is controlled above 10 ° C. In sufficient light, theneed to control the light intensity during the recovery to avoid dryness of the leaves.
1. Pruning the blades
After the fleshy water occurs, the sharp knife after disinfection should be used Use a cotton swab, dip the multi -bacterial solution, and apply the succulent wound to sterilize and disinfection for succulent to reduce the breeding of the disease.
2. The environment of ventilation
After the trim is trimmed, the succulent needs to be transferred to the ventilation place for maintenance, and the room temperature is increased to above 10 ° C to use heating Create a warm and comfortable growth environment for succulent. Be careful not to place succulent plants to the heating mouth for maintenance, otherwise the temperature difference will be too large, which will easily lead to death.
3, adequate light
Be careful not to place the succulent succulent in a sunny environment for maintenance, otherwise it will evaporate the moisture in the wound As a result, the fleshy is dry. Therefore, before the fleshy is restored, it only needs to provide it with 3 to 4 hours of astigmatism.
4. Control the amount of watering
The condition of the fleshy water may be caused by too much watering Among them, the amount of watering needs to be controlled. Succulent plants have a certain drought tolerance. When watering succulent plants, it is necessary to dry and do not wet. Each time the soil is dry and white, water is properly watered to avoid stagnant water.